ArtNet

derick · Post by **derick** » Sat May 13, 2017 2:12 am

Any news on implementing ArtNet in SCS ?

I am using a Chamsys pc wing, so no midi output, it would be great if i could receive artnet as a "go" command on my SCS laptop.

Mike Daniell · Post by **Mike Daniell** » Sat May 13, 2017 1:28 pm

I have looked into ArtNet support but found the protocol fairly complicated in parts. Artistic Licence provided a DLL which looked helpful but that was only provided as a 32-bit DLL. Some time ago I contacted Artistic Licence about this and they informed me that they would not be supplying a 64-bit version. I've just had another look at their web site and I can't even find the 32-bit version now.

I'll have another look at the protocol and try to work out what can reasonably be supported in SCS.

derick · Post by **derick** » Sun May 14, 2017 3:25 am

I use a workaround by using a program called Artnet2midi connected to Loopbe1midi in, and SCS connected via midi to Loopbe1 midi out , it works, but i do not really trust using two more programs in the background.
It also has some latency, so i have more program work to get it right for dance performances. (i have to advance the sound cue 100 msec in Chamsys to be on spot with the lights)

So if you can implement it in SCS it would be much easier and safer.

derick · Post by **derick** » Wed Feb 07, 2018 8:01 pm

Any news on Artnet implementation ?

Mike Daniell · Post by **Mike Daniell** » Wed Feb 07, 2018 8:49 pm

derick wrote:Any news on Artnet implementation ?

Not yet, but it's still on the radar. I've purchased an ENTTEC ODE MK2 with plans to implement at least ESP and Art-Net. Probably ESP first as it seems a simpler protocol, but the ESP protocol does have some similarities to Art-Net.

derick · Post by **derick** » Wed Feb 07, 2018 11:08 pm

Ok, thanks

helamast · Post by **helamast** » Thu Mar 21, 2019 10:33 pm

Hi there,

any update regarding Artnet?

regards

Stefan

dee99 · Post by **dee99** » Thu Mar 21, 2019 11:21 pm

sACN is the preferred protocol these days although most devices support both.
This may help
https://www.openlighting.org/libartnet-main/

helamast · Post by **helamast** » Thu Mar 21, 2019 11:45 pm

would be ok as well, the lightconsole is able to sacn.

is this implemented already?

regards

Stefan

didiv · Post by **didiv** » Thu Jul 28, 2022 9:33 pm

Is Art-Net implementation expected in SCS?

Mike Daniell · Post by **Mike Daniell** » Fri Jul 29, 2022 1:12 pm

didiv wrote: ↑
Thu Jul 28, 2022 9:33 pm
Is Art-Net implementation expected in SCS?

It's still on my 'to do list'. I have an ENTTEC ODE Mk2 but my earlier attempts at getting SCS to communicate with this were not successful. I'll revisit this when I've completed some other enhancements.

mookai1973 · Post by **mookai1973** » Fri Nov 04, 2022 3:57 am

Hi Mike,

I hope to see Artnet and sACN on SCS v12.

Thank you for your hard work.

Regards,
Kai

LONGJOIN · Post by **LONGJOIN** » Fri Nov 04, 2022 10:52 am

Looking forward to the implementation of ArtNet +1

Show Cue System

ArtNet

ArtNet

Re: ArtNet

Re: ArtNet

Re: ArtNet

Re: ArtNet

Re: ArtNet

Re: ArtNet

Re: ArtNet

Re: ArtNet

Re: ArtNet

Re: ArtNet

Re: ArtNet

Re: ArtNet