Problems in SCS9 (fix in 9.1.2)

kmkonline · Post by **kmkonline** » Sat Apr 22, 2006 3:36 am

After key in the registration detail, it will be authorize the that particular time, and after restart of the program, it will goes to the demo mode again.

The speaker selection is only available for x2 L+R... The other option are dim.

Will this be the problem of my registration code.

Thx

KMK

Mike Daniell · Post by **Mike Daniell** » Sat Apr 22, 2006 8:06 am

Is this under Chinese Windows or some other multi-byte character set? Sounds like an issue I had in SCS 8 but which was fixed after I made some modifications to the encryption algorithm.

The speaker selection issue is probably related. What you are seeing is the SCS-Standard device option (2 devices), but since your registration is for SCS-Professional you should be seeing all the device options.

kmkonline · Post by **kmkonline** » Sat Apr 22, 2006 8:28 pm

I am using english ver. of windows although i will work on chinese input using xp sometimes.

I see nothing except the main FOH speaker..., do i need to send you the screen dump?

Thx

Mike Daniell · Post by **Mike Daniell** » Sat Apr 22, 2006 8:42 pm

Yes, please.

Mike Daniell · Post by **Mike Daniell** » Mon Apr 24, 2006 5:27 pm

Registration failure fixed in 9.1.1. Still looking into speaker selection problem.

kmkonline · Post by **kmkonline** » Mon Apr 24, 2006 5:56 pm

Thank you very much !

I can enjoy the registered ver. of scs9

Work hard

Mike Daniell · Post by **Mike Daniell** » Wed Apr 26, 2006 7:00 pm

KMK has advised that the speaker selection problem is also fixed with 9.1.2.

kmkonline · Post by **kmkonline** » Thu Apr 27, 2006 2:35 am

thx very much,.

dbn · Post by **dbn** » Sat May 06, 2006 10:45 am

It seems that I may be having a similar issue. I'm running version 9.1.1 with the Professional level license registration.

When I go into the "Editor" and select "Production Properties", I'm unable to (or can't figure out how to) add more devices in the in the "Sound Devices Required for this Production" table. I have the default "FOH" isntance of "Device Name Used in Cues". All the other device lines in the table are grayed-out.

I know that all the audio devices installed in the computer are recognized, because they appear in the "Physical Device" pull down menu as options for the default "FOH" device, two standard computer sound cards (Yamaha and Sound Blaster) and one M-Audio Delta 44.

The on-line help indicates that I should be able to create new entries in this table. I cannot. I have this problem on both my "home PC" for editing and the "theatre PC" for playback.

Any ideas about what I'm doing wrong?

BTW, the OS is Windows XP, SP2 with all the latest MS mandatory updates applied.

Thanks, in advance.

Regards,

Dave Nelson

Mike Daniell · Post by **Mike Daniell** » Sat May 06, 2006 11:29 am

Dave,

You mention you are using 9.1.1. Try the latest version, which you can download from here. You should find this will enable you to select devices in all the 'Sound Device' lines in the Production Properties. If you still have a problem using 9.1.3, let me know.

Mike

dbn · Post by **dbn** » Sat May 06, 2006 11:40 am

Mike,

Duh-Oh!! I updated to 9.1.3 and the problem is fixed. I hadn't payed close enough attention to the download page to realize that I needed to load an update in addition to loading the full install V9 kit.

Regards,

Dave Nelson

Show Cue System

Problems in SCS9 (fix in 9.1.2)

Problems in SCS9 (fix in 9.1.2)

Similar problem?